Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
C-24.2, r. 32 - Regulation respecting safety standards for road vehicles
Section 115
Disposition versions
115. The suspension components shall comply with the following standards:
(1) every component shall be present, adequate, securely mounted and none shall show signs of wear, damage or use in a way that hampers the good working order of the suspension;
(2) no component for mounting the axle to the road vehicle or component for positioning the axle or wheel to the road vehicle shall be cracked, broken, not securely mounted, out of place, warped, missing or welded, excluding the welds done by the manufacturer;
(3) (paragraph revoked);
(4) any repair shall provide the same safety level as the level that existed when the vehicle was manufactured;
(5) the axles shall not be cracked, warped or have welded repairs; they shall be securely mounted, properly aligned and be perpendicular to the lengthwise axis of the vehicle; and
(6) the suspension shall not allow a tire to touch the body or frame under normal conditions of use.
115. The suspension components shall comply with the following standards:
(1) every component shall be adequate, securely fixed and none shall be missing;
(2) no component for mounting or positioning the axle or wheel to the road vehicle or supporting it shall be cracked, broken, not securely mounted, out of place, warped, missing or welded, excluding the welds done by the manufacturer;
(3) all the suspension parts shall be present and adequate and none shall show signs of wear, damage or use in a way that adversely affects its good working ording order;
(4) any repair shall provide the same safety level as the level that existed when the vehicle was manufactured;
(5) the axles shall not be cracked, warped or have welded repairs; they shall be securely mounted, properly aligned and be perpendicular to the lengthwise axis of the vehicle; and
(6) the suspension shall not allow a tire to touch the body or frame under normal conditions of use.
